Graco Waste Oil Evacuation System with 90 L (24 gal) Steel Tank, Suction Probes and Adapters

Graco Waste Oil Evacuation System with 90 L (24 gal) Steel Tank, Suction Probes and AdaptersFeatures For shops requiring flexibility when it comes to removing used fluids, use Graco's vacuum assisted evacuation system. Easy to Drain Pressurise using shop air for easy oil evacuation. Vacuum Gauge Ensure peak performance with easy to read vacuum gauge. Vacuum Probes Variety of flexible suction attachments and adapters included. Large 90 Litre (24 Gallon) Capacity Receiver Perfect for small to large shops without an evacuation system.

Cutter Diameter: 33/64"

Grommets at each support hinge allow unit to be staked to the ground when needed

Jet 698079 Description

the housing is designed to withstand the demands of industrial environments and high-pressure applications

All check valves on our compressors are all brass with a Teflon seating

pistons and rings with an oil-filled crankcase

This S2 adapter for PPS 2

PISTON ASSY is a key component designed for use in fluid dispensing applications

) 12 Lift (Ft

Low profile

Oversized needle bearing on the drive sides and ball bearings on the non-drive side assure proper shaft alignment and maximum life

Meets NFPA-33 requirements for inside access