AKG Motorsport - BMW Rear Upper Shock Mount Bushings, Poly 85A – E90, E92, E82

AKG Motorsport - BMW Rear Upper Shock Mount Bushings, Poly 85A – E90, E92, E82These BMW E90, E92, E82 Polyurethane (85A) Rear Upper Shock Mount Bushings are true, performance rear shock mounts that drastically reduce the deflection that occurs with the factory upper rear shock mount bushings. The stock shock mount bushings deflect under load negatively affecting the rear shock damping, especially with a modified suspension and increased shock valving. Upgrading your factory shock mount bushings to our BMW E90, E92, E82

814-T006 : T=1

What this translates to is a twin-disc clutch that has the ability to take serious abuse and generate a clean release with all GM factory based hydraulics to 8000 rpm

40mm of roll centre correction eliminates bump steer & provides superior control and steering input

Bearing mounted upper front spring platform

Spring Rates: 6k front 6K Rear

Tight fitment when retaining air conditioning

Yes the valve covers see pressure too

9 Wideband Oxygen Sensor - Input/Output Harness - and assorted

All Link G4X WireIn ECU’s (Note: Loom B will also be required for the Storm/Fury/Xtreme)

CAN H & L crimped with Superseal terminals

Driver and Passenger Trans cross member for Z32 transmission Trans cross member bolting hardware

The BR series BC Racing Coilovers use a large 44mm diameter piston in a 53mm diameter damper body to maximize oil capacity