Shrink chuck 3° HSK 63 - 10 - 160

Shrink chuck 3° HSK 63 - 10 - 160Application: For mounting tools with straight shanks. Note: Toolholders suitable for induction , contact and hot air shrink units. 3, 4, 5 with h4 tolerance and 6 32 with h6 tolerance For 3, 4 and 5 mm only solid carbide tool shanks must be used! All holders are made of forged steel Specific, low warpage hardened Surface hardened HRC 58~60 Hardening depth 0,8mm~0,9mm Taper angle tolerance < AT 3 according to DIN 2080 Surface roughness Ra < 0,4 m

For the storage of tapping quick change adaptors

Ø 125 mm with locks

For highest axial and radial loading

SK 30 without coolant exit bores on the end faceDelivery:

5 with h4-tolerance and Ø 6 – Ø 32 with h6-tolerance2

longer tool life

Only nominal size d can be clamped with sealing plug for internal cooling (applicable up to 21 bar) In order to achieve an optimum sealing the tool must be clamped on the complete length of the ground drill of the collet

- Determining the reference points (calibration) of optical presetting devices

E3= 12 pieces

length adjustment range

Nubs on the top of the inserts

All collets with outside form DIN 6388 (ISO 10897) can be clamped